#include <quaternion.hpp>

公開メンバ関数
	Quat (const Vec< _Tp, 4 > &coeff)
	From Vec4d or Vec4f.

	Quat (_Tp w, _Tp x, _Tp y, _Tp z)
	from four numbers.

_Tp	at (size_t index) const
	a way to get element. [詳解]

Quat< _Tp >	conjugate () const
	return the conjugate of this quaternion. [詳解]

Quat< _Tp >	exp () const
	return the value of exponential value. [詳解]

Quat< _Tp >	log (QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	return the value of logarithm function. [詳解]

Quat< _Tp >	power (const _Tp x, QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	return the value of power function with index . [詳解]

Quat< _Tp >	sqrt (QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	return $\sqrt{q}$ . [詳解]

Quat< _Tp >	power (const Quat< _Tp > &q, QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	return the value of power function with quaternion . [詳解]

Quat< _Tp >	crossProduct (const Quat< _Tp > &q) const
	return the crossProduct between $p = (a, b, c, d) = (a, \boldsymbol{u})$ and $q = (w, x, y, z) = (w, \boldsymbol{v})$ . [詳解]

_Tp	norm () const
	return the norm of quaternion. [詳解]

Quat< _Tp >	normalize () const
	return a normalized . [詳解]

Quat< _Tp >	inv (QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	return $q^{-1}$ which is an inverse of satisfying $q * q^{-1} = 1$ . [詳解]

Quat< _Tp >	sinh () const
	return sinh value of this quaternion, sinh could be calculated as: $\sinh(p) = \sin(w)\cos(\|\|\boldsymbol{v}\|\|) + \cosh(w)\frac{v}{\|\|\boldsymbol{v}\|\|}\sin\|\|\boldsymbol{v}\|\|$ where $\boldsymbol{v} = [x, y, z].$ [詳解]

Quat< _Tp >	cosh () const
	return cosh value of this quaternion, cosh could be calculated as: [詳解]

Quat< _Tp >	tanh () const
	return tanh value of this quaternion, tanh could be calculated as: [詳解]

Quat< _Tp >	sin () const
	return sin value of this quaternion, sin could be calculated as: [詳解]

Quat< _Tp >	cos () const
	return cos value of this quaternion, cos could be calculated as: [詳解]

Quat< _Tp >	tan () const
	return tan value of this quaternion, tan could be calculated as: [詳解]

Quat< _Tp >	asin () const
	return arcsin value of this quaternion, arcsin could be calculated as: [詳解]

Quat< _Tp >	acos () const
	return arccos value of this quaternion, arccos could be calculated as: [詳解]

Quat< _Tp >	atan () const
	return arctan value of this quaternion, arctan could be calculated as: [詳解]

Quat< _Tp >	asinh () const
	return arcsinh value of this quaternion, arcsinh could be calculated as: [詳解]

Quat< _Tp >	acosh () const
	return arccosh value of this quaternion, arccosh could be calculated as: [詳解]

Quat< _Tp >	atanh () const
	return arctanh value of this quaternion, arctanh could be calculated as: [詳解]

bool	isNormal (_Tp eps=CV_QUAT_EPS) const
	return true if this quaternion is a unit quaternion. [詳解]

void	assertNormal (_Tp eps=CV_QUAT_EPS) const
	to throw an error if this quaternion is not a unit quaternion. [詳解]

Matx< _Tp, 3, 3 >	toRotMat3x3 (QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	transform a quaternion to a 3x3 rotation matrix. [詳解]

Matx< _Tp, 4, 4 >	toRotMat4x4 (QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	transform a quaternion to a 4x4 rotation matrix. [詳解]

Vec< _Tp, 4 >	toVec () const
	transform the this quaternion to a Vec<T, 4>. [詳解]

Vec< _Tp, 3 >	toRotVec (QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	transform this quaternion to a Rotation vector. [詳解]

_Tp	getAngle (QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	get the angle of quaternion, it returns the rotation angle. [詳解]

Vec< _Tp, 3 >	getAxis (QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT) const
	get the axis of quaternion, it returns a vector of length 3. [詳解]

_Tp	dot (Quat< _Tp > q) const
	return the dot between quaternion and this quaternion. [詳解]

Quat< _Tp >	operator- () const
	Return opposite quaternion which satisfies [詳解]

bool	operator== (const Quat< _Tp > &) const
	return true if two quaternions p and q are nearly equal, i.e. when the absolute value of each and is less than CV_QUAT_EPS.

Quat< _Tp >	operator+ (const Quat< _Tp > &) const
	Addition operator of two quaternions p and q. It returns a new quaternion that each value is the sum of and . [詳解]

Quat< _Tp > &	operator+= (const Quat< _Tp > &)
	Addition assignment operator of two quaternions p and q. It adds right operand to the left operand and assign the result to left operand. [詳解]

Quat< _Tp >	operator- (const Quat< _Tp > &) const
	Subtraction operator of two quaternions p and q. It returns a new quaternion that each value is the sum of and . [詳解]

Quat< _Tp > &	operator-= (const Quat< _Tp > &)
	Subtraction assignment operator of two quaternions p and q. It subtracts right operand from the left operand and assign the result to left operand. [詳解]

Quat< _Tp > &	operator*= (const Quat< _Tp > &)
	Multiplication assignment operator of two quaternions q and p. It multiplies right operand with the left operand and assign the result to left operand. [詳解]

Quat< _Tp > &	operator*= (const _Tp s)
	Multiplication assignment operator of a quaternions and a scalar. It multiplies right operand with the left operand and assign the result to left operand. [詳解]

Quat< _Tp >	operator* (const Quat< _Tp > &) const
	Multiplication operator of two quaternions q and p. Multiplies values on either side of the operator. [詳解]

Quat< _Tp >	operator/ (const _Tp s) const
	Division operator of a quaternions and a scalar. It divides left operand with the right operand and assign the result to left operand. [詳解]

Quat< _Tp >	operator/ (const Quat< _Tp > &) const
	Division operator of two quaternions p and q. Divides left hand operand by right hand operand. [詳解]

Quat< _Tp > &	operator/= (const _Tp s)
	Division assignment operator of a quaternions and a scalar. It divides left operand with the right operand and assign the result to left operand. [詳解]

Quat< _Tp > &	operator/= (const Quat< _Tp > &)
	Division assignment operator of two quaternions p and q; It divides left operand with the right operand and assign the result to left operand. [詳解]

_Tp &	operator[] (std::size_t n)

const _Tp &	operator[] (std::size_t n) const

Vec< _Tp, 3 >	toEulerAngles (QuatEnum::EulerAnglesType eulerAnglesType)
	Transform a quaternion q to Euler angles. [詳解]

静的公開メンバ関数
static Quat< _Tp >	createFromAngleAxis (const _Tp angle, const Vec< _Tp, 3 > &axis)
	from an angle, axis. Axis will be normalized in this function. And it generates [詳解]

static Quat< _Tp >	createFromRotMat (InputArray R)
	from a 3x3 rotation matrix.

static Quat< _Tp >	createFromRvec (InputArray rvec)
	from a rotation vector has the form $\theta \cdot \boldsymbol{u}$ , where $\theta$ represents rotation angle and $\boldsymbol{u}$ represents normalized rotation axis. [詳解]

static Quat< _Tp >	createFromEulerAngles (const Vec< _Tp, 3 > &angles, QuatEnum::EulerAnglesType eulerAnglesType)
	from Euler angles [詳解]

static Quat< _Tp >	createFromYRot (const _Tp theta)
	get a quaternion from a rotation about the Y-axis by $\theta$ . [詳解]

static Quat< _Tp >	createFromXRot (const _Tp theta)
	get a quaternion from a rotation about the X-axis by $\theta$ . [詳解]

static Quat< _Tp >	createFromZRot (const _Tp theta)
	get a quaternion from a rotation about the Z-axis by $\theta$ . [詳解]

static Quat< _Tp >	lerp (const Quat< _Tp > &q0, const Quat &q1, const _Tp t)
	To calculate the interpolation from to by Linear Interpolation(Nlerp) For two quaternions, this interpolation curve can be displayed as: [詳解]

static Quat< _Tp >	nlerp (const Quat< _Tp > &q0, const Quat &q1, const _Tp t, QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT)
	To calculate the interpolation from to by Normalized Linear Interpolation(Nlerp). it returns a normalized quaternion of Linear Interpolation(Lerp). [詳解]

static Quat< _Tp >	slerp (const Quat< _Tp > &q0, const Quat &q1, const _Tp t, QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT, bool directChange=true)
	To calculate the interpolation between and by Spherical Linear Interpolation(Slerp), which can be defined as: [詳解]

static Quat< _Tp >	squad (const Quat< _Tp > &q0, const Quat< _Tp > &s0, const Quat< _Tp > &s1, const Quat< _Tp > &q1, const _Tp t, QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT, bool directChange=true)
	To calculate the interpolation between , , , by Spherical and quadrangle(Squad). This could be defined as: [詳解]

static Quat< _Tp >	interPoint (const Quat< _Tp > &q0, const Quat< _Tp > &q1, const Quat< _Tp > &q2, QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT)
	This is the part calculation of squad. To calculate the intermedia quaternion between each three quaternion [詳解]

static Quat< _Tp >	spline (const Quat< _Tp > &q0, const Quat< _Tp > &q1, const Quat< _Tp > &q2, const Quat< _Tp > &q3, const _Tp t, QuatAssumeType assumeUnit=QUAT_ASSUME_NOT_UNIT)
	to calculate a quaternion which is the result of a continuous spline curve constructed by squad at the ratio t. Here, the interpolation values are between and . and are used to ensure the continuity. if t = 0, it returns , if t = 1, it returns . [詳解]

公開変数類
_Tp	w

_Tp	x

_Tp	y

_Tp	z

静的公開変数類
static constexpr _Tp	CV_QUAT_EPS = (_Tp)1.e-6

static constexpr _Tp	CV_QUAT_CONVERT_THRESHOLD = (_Tp)1.e-6

フレンド
template<typename T >
Quat< T >	exp (const Quat< T > &q)
	return the value of exponential value. [詳解]

template<typename T >
Quat< T >	log (const Quat< T > &q, QuatAssumeType assumeUnit)
	return the value of logarithm function. [詳解]

template<typename T >
Quat< T >	power (const Quat< T > &q, const T x, QuatAssumeType assumeUnit)
	return the value of power function with index . [詳解]

template<typename T >
Quat< T >	sqrt (const Quat< T > &q, QuatAssumeType assumeUnit)
	return $\sqrt{q}$ . [詳解]

template<typename T >
Quat< T >	power (const Quat< T > &p, const Quat< T > &q, QuatAssumeType assumeUnit)
	return the value of power function with quaternion . [詳解]

template<typename T >
Quat< T >	crossProduct (const Quat< T > &p, const Quat< T > &q)
	return the crossProduct between $p = (a, b, c, d) = (a, \boldsymbol{u})$ and $q = (w, x, y, z) = (w, \boldsymbol{v})$ . [詳解]

template<typename T >
Quat< T >	inv (const Quat< T > &q, QuatAssumeType assumeUnit)
	return $q^{-1}$ which is an inverse of which satisfies $q * q^{-1} = 1$ . [詳解]

template<typename T >
Quat< T >	sinh (const Quat< T > &q)
	return sinh value of quaternion q, sinh could be calculated as: [詳解]

template<typename T >
Quat< T >	cosh (const Quat< T > &q)
	return cosh value of quaternion q, cosh could be calculated as: [詳解]

template<typename T >
Quat< T >	tanh (const Quat< T > &q)
	return tanh value of quaternion q, tanh could be calculated as: [詳解]

template<typename T >
Quat< T >	sin (const Quat< T > &q)
	return tanh value of quaternion q, sin could be calculated as: [詳解]

template<typename T >
Quat< T >	cos (const Quat< T > &q)
	return sin value of quaternion q, cos could be calculated as: [詳解]

template<typename T >
Quat< T >	tan (const Quat< T > &q)
	return tan value of quaternion q, tan could be calculated as: [詳解]

template<typename T >
Quat< T >	asin (const Quat< T > &q)
	return arcsin value of quaternion q, arcsin could be calculated as: [詳解]

template<typename T >
Quat< T >	acos (const Quat< T > &q)
	return arccos value of quaternion q, arccos could be calculated as: [詳解]

template<typename T >
Quat< T >	atan (const Quat< T > &q)
	return arctan value of quaternion q, arctan could be calculated as: [詳解]

template<typename T >
Quat< T >	asinh (const Quat< T > &q)
	return arcsinh value of quaternion q, arcsinh could be calculated as: [詳解]

template<typename T >
Quat< T >	acosh (const Quat< T > &q)
	return arccosh value of quaternion q, arccosh could be calculated as: [詳解]

template<typename T >
Quat< T >	atanh (const Quat< T > &q)
	return arctanh value of quaternion q, arctanh could be calculated as: [詳解]

template<typename T >
Quat< T >	cv::operator- (const T s, const Quat< T > &)
	Subtraction operator of a scalar and a quaternions. Subtracts right hand operand from left hand operand. [詳解]

template<typename T >
Quat< T >	cv::operator- (const Quat< T > &, const T s)
	Subtraction operator of a quaternions and a scalar. Subtracts right hand operand from left hand operand. [詳解]

template<typename T >
Quat< T >	cv::operator+ (const T s, const Quat< T > &)
	Addition operator of a quaternions and a scalar. Adds right hand operand from left hand operand. [詳解]

template<typename T >
Quat< T >	cv::operator+ (const Quat< T > &, const T s)
	Addition operator of a quaternions and a scalar. Adds right hand operand from left hand operand. [詳解]

template<typename T >
Quat< T >	cv::operator* (const T s, const Quat< T > &)
	Multiplication operator of a scalar and a quaternions. It multiplies right operand with the left operand and assign the result to left operand. [詳解]

template<typename T >
Quat< T >	cv::operator* (const Quat< T > &, const T s)
	Multiplication operator of a quaternion and a scalar. It multiplies right operand with the left operand and assign the result to left operand. [詳解]

template<typename S >
std::ostream &	cv::operator<< (std::ostream &, const Quat< S > &)

詳解

template<typename _Tp>
class cv::Quat< _Tp >

Quaternion is a number system that extends the complex numbers. It can be expressed as a rotation in three-dimensional space. A quaternion is generally represented in the form:

$q = w + x\boldsymbol{i} + y\boldsymbol{j} + z\boldsymbol{k}$

$q = [w, x, y, z]$

$q = [w, \boldsymbol{v}]$

$q = ||q||[\cos\psi, u_x\sin\psi,u_y\sin\psi, u_z\sin\psi].$

$q = ||q||[\cos\psi, \boldsymbol{u}\sin\psi]$

where $\psi = \frac{\theta}{2}$ , $\theta$ represents rotation angle, $\boldsymbol{u} = [u_x, u_y, u_z]$ represents normalized rotation axis, and $||q||$ represents the norm of $q$ .

A unit quaternion is usually represents rotation, which has the form:

$q = [\cos\psi, u_x\sin\psi,u_y\sin\psi, u_z\sin\psi].$

To create a quaternion representing the rotation around the axis $\boldsymbol{u}$ with angle $\theta$ , you can use

using namespace cv;
double angle = CV_PI;
Vec3d axis = {0, 0, 1};
Quatd q = Quatd::createFromAngleAxis(angle, axis);

You can simply use four same type number to create a quaternion

Quatd q(1, 2, 3, 4);

Or use a Vec4d or Vec4f vector.

Vec4d vec{1, 2, 3, 4};

Quatd q(vec);

Vec4f vec{1, 2, 3, 4};

Quatf q(vec);

If you already have a 3x3 rotation matrix R, then you can use

Quatd q = Quatd::createFromRotMat(R);

cv::Quat::createFromRotMat

static Quat< _Tp > createFromRotMat(InputArray R)

from a 3x3 rotation matrix.

If you already have a rotation vector rvec which has the form of angle * axis, then you can use

Quatd q = Quatd::createFromRvec(rvec);

cv::Quat::createFromRvec

static Quat< _Tp > createFromRvec(InputArray rvec)

from a rotation vector has the form , where represents rotation angle and represents normalized ro...

To extract the rotation matrix from quaternion, see toRotMat3x3()

To extract the Vec4d or Vec4f, see toVec()

To extract the rotation vector, see toRotVec()

If there are two quaternions $q_0, q_1$ are needed to interpolate, you can use nlerp(), slerp() or spline()

Quatd::nlerp(q0, q1, t)
 
Quatd::slerp(q0, q1, t)
 
Quatd::spline(q0, q0, q1, q1, t)

spline can smoothly connect rotations of multiple quaternions

Three ways to get an element in Quaternion

Quatf q(1,2,3,4);
std::cout << q.w << std::endl; // w=1, x=2, y=3, z=4
std::cout << q[0] << std::endl; // q[0]=1, q[1]=2, q[2]=3, q[3]=4
std::cout << q.at(0) << std::endl;

関数詳解

◆ acos()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::acos ( ) const

return arccos value of this quaternion, arccos could be calculated as:

$\arccos(q) = -\frac{\boldsymbol{v}}{||\boldsymbol{v}||}arccosh(q)$

where $\boldsymbol{v} = [x, y, z].$

For example

Quatd q(1,2,3,4);

q.acos();

◆ acosh()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::acosh ( ) const

return arccosh value of this quaternion, arccosh could be calculated as:

$arcosh(q) = \ln(q + \sqrt{q^2 - 1})$

.

For example

Quatd q(1,2,3,4);

q.acosh();

◆ asin()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::asin ( ) const

return arcsin value of this quaternion, arcsin could be calculated as:

$\arcsin(q) = -\frac{\boldsymbol{v}}{||\boldsymbol{v}||}arcsinh(q\frac{\boldsymbol{v}}{||\boldsymbol{v}||})$

where $\boldsymbol{v} = [x, y, z].$

For example

Quatd q(1,2,3,4);

q.asin();

◆ asinh()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::asinh ( ) const

return arcsinh value of this quaternion, arcsinh could be calculated as:

$arcsinh(q) = \ln(q + \sqrt{q^2 + 1})$

.

For example

Quatd q(1,2,3,4);

q.asinh();

◆ assertNormal()

template<typename _Tp >

void cv::Quat< _Tp >::assertNormal ( _Tp eps = CV_QUAT_EPS ) const

to throw an error if this quaternion is not a unit quaternion.

引数

eps	tolerance scope of normalization.

参照: isNormal

◆ at()

template<typename _Tp >

_Tp cv::Quat< _Tp >::at ( size_t index ) const

a way to get element.

引数

index over a range [0, 3].

A quaternion q

q.at(0) is equivalent to q.w,

q.at(1) is equivalent to q.x,

q.at(2) is equivalent to q.y,

q.at(3) is equivalent to q.z.

◆ atan()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::atan ( ) const

return arctan value of this quaternion, arctan could be calculated as:

$\arctan(q) = -\frac{\boldsymbol{v}}{||\boldsymbol{v}||}arctanh(q\frac{\boldsymbol{v}}{||\boldsymbol{v}||})$

where $\boldsymbol{v} = [x, y, z].$

For example

Quatd q(1,2,3,4);

q.atan();

◆ atanh()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::atanh ( ) const

return arctanh value of this quaternion, arctanh could be calculated as:

$arcsinh(q) = \frac{\ln(q + 1) - \ln(1 - q)}{2}$

.

For example

Quatd q(1,2,3,4);

q.atanh();

◆ conjugate()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::conjugate ( ) const

return the conjugate of this quaternion.

$q.conjugate() = (w, -x, -y, -z).$

◆ cos()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::cos ( ) const

return cos value of this quaternion, cos could be calculated as:

$\cos(p) = \cos(w) * \cosh(||\boldsymbol{v}||) - \sin(w)\frac{\boldsymbol{v}}{||\boldsymbol{v}||}\sinh(||\boldsymbol{v}||)$

where $\boldsymbol{v} = [x, y, z].$

For example

Quatd q(1,2,3,4);

q.cos();

◆ cosh()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::cosh ( ) const

return cosh value of this quaternion, cosh could be calculated as:

$\cosh(p) = \cosh(w) * \cos(||\boldsymbol{v}||) + \sinh(w)\frac{\boldsymbol{v}}{||\boldsymbol{v}||}sin(||\boldsymbol{v}||)$

where $\boldsymbol{v} = [x, y, z].$

For example

Quatd q(1,2,3,4);

q.cosh();

◆ createFromAngleAxis()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::createFromAngleAxis	(	const _Tp	angle,
		const Vec< _Tp, 3 > &	axis
	)

static

from an angle, axis. Axis will be normalized in this function. And it generates

$q = [\cos\psi, u_x\sin\psi,u_y\sin\psi, u_z\sin\psi].$

where $\psi = \frac{\theta}{2}$ , $\theta$ is the rotation angle.

◆ createFromEulerAngles()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::createFromEulerAngles	(	const Vec< _Tp, 3 > &	angles,
		QuatEnum::EulerAnglesType	eulerAnglesType
	)

static

from Euler angles

A quaternion can be generated from Euler angles by combining the quaternion representations of the Euler rotations.

For example, if we use intrinsic rotations in the order of X-Y-Z, $\theta_1$ is rotation around the X-axis, $\theta_2$ is rotation around the Y-axis, $\theta_3$ is rotation around the Z-axis. The final quaternion q can be calculated by

${q} = q_{X, \theta_1} q_{Y, \theta_2} q_{Z, \theta_3}$

where $q_{X, \theta_1}$ is created from createFromXRot, $q_{Y, \theta_2}$ is created from createFromYRot, $q_{Z, \theta_3}$ is created from createFromZRot.

引数

angles	the Euler angles in a vector of length 3
eulerAnglesType	the convertion Euler angles type

◆ createFromRvec()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::createFromRvec ( InputArray rvec )

static

from a rotation vector $r$ has the form $\theta \cdot \boldsymbol{u}$ , where $\theta$ represents rotation angle and $\boldsymbol{u}$ represents normalized rotation axis.

Angle and axis could be easily derived as:

$\begin{equation} \begin{split} \psi &= ||r||\\ \boldsymbol{u} &= \frac{r}{\theta} \end{split} \end{equation}$

Then a quaternion can be calculated by

$q = [\cos\psi, \boldsymbol{u}\sin\psi]$

where $\psi = \theta / 2$

◆ createFromXRot()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::createFromXRot ( const _Tp theta )

static

get a quaternion from a rotation about the X-axis by $\theta$ .

$q = \cos(\theta/2)+sin(\theta/2) i +0 j +0 k$

◆ createFromYRot()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::createFromYRot ( const _Tp theta )

static

get a quaternion from a rotation about the Y-axis by $\theta$ .

$q = \cos(\theta/2)+0 i+ sin(\theta/2) j +0k$

◆ createFromZRot()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::createFromZRot ( const _Tp theta )

static

get a quaternion from a rotation about the Z-axis by $\theta$ .

$q = \cos(\theta/2)+0 i +0 j +sin(\theta/2) k$

◆ crossProduct()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::crossProduct ( const Quat< _Tp > & q ) const

return the crossProduct between $p = (a, b, c, d) = (a, \boldsymbol{u})$ and $q = (w, x, y, z) = (w, \boldsymbol{v})$ .

$p \times q = \frac{pq- qp}{2}.$

$p \times q = \boldsymbol{u} \times \boldsymbol{v}.$

$p \times q = (cz-dy)i + (dx-bz)j + (by-xc)k.$

For example

Quatd q{1,2,3,4};
Quatd p{5,6,7,8};
p.crossProduct(q)

◆ dot()

template<typename _Tp >

_Tp cv::Quat< _Tp >::dot ( Quat< _Tp > q ) const

return the dot between quaternion $q$ and this quaternion.

dot(p, q) is a good metric of how close the quaternions are. Indeed, consider the unit quaternion difference $p^{-1} * q$ , its real part is dot(p, q). At the same time its real part is equal to $\cos(\beta/2)$ where $\beta$ is an angle of rotation between p and q, i.e., Therefore, the closer dot(p, q) to 1, the smaller rotation between them.

$p \cdot q = p.w \cdot q.w + p.x \cdot q.x + p.y \cdot q.y + p.z \cdot q.z$

引数

q	the other quaternion.

For example

Quatd q(1,2,3,4);
Quatd p(5,6,7,8);
p.dot(q);

◆ exp()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::exp ( ) const

return the value of exponential value.

$\exp(q) = e^w (\cos||\boldsymbol{v}||+ \frac{v}{||\boldsymbol{v}||}\sin||\boldsymbol{v}||)$

where $\boldsymbol{v} = [x, y, z].$

For example

Quatd q{1,2,3,4};

cout << q.exp() << endl;

◆ getAngle()

template<typename _Tp >

_Tp cv::Quat< _Tp >::getAngle ( QuatAssumeType assumeUnit = QUAT_ASSUME_NOT_UNIT ) const

get the angle of quaternion, it returns the rotation angle.

引数

assumeUnit

if QUAT_ASSUME_UNIT, this quaternion assume to be a unit quaternion and this function will save some computations.

$\psi = 2 *arccos(\frac{w}{||q||})$

For example

Quatd q(1,2,3,4);
q.getAngle();
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
q.normalize().getAngle(assumeUnit);//same as q.getAngle().

覚え書き: It always return the value between $[0, 2\pi]$ .

◆ getAxis()

template<typename _Tp >

Vec< _Tp, 3 > cv::Quat< _Tp >::getAxis ( QuatAssumeType assumeUnit = QUAT_ASSUME_NOT_UNIT ) const

get the axis of quaternion, it returns a vector of length 3.

引数

assumeUnit if QUAT_ASSUME_UNIT, this quaternion assume to be a unit quaternion and this function will save some computations.

the unit axis $\boldsymbol{u}$ is defined by

$\begin{equation} \begin{split} \boldsymbol{v} &= \boldsymbol{u} ||\boldsymbol{v}||\\ &= \boldsymbol{u}||q||sin(\frac{\theta}{2}) \end{split} \end{equation}$

where $v=[x, y ,z]$ and $\theta$ represents rotation angle.

For example

Quatd q(1,2,3,4);
q.getAxis();
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
q.normalize().getAxis(assumeUnit);//same as q.getAxis()

◆ interPoint()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::interPoint	(	const Quat< _Tp > &	q0,
		const Quat< _Tp > &	q1,
		const Quat< _Tp > &	q2,
		QuatAssumeType	assumeUnit = `QUAT_ASSUME_NOT_UNIT`
	)

static

This is the part calculation of squad. To calculate the intermedia quaternion $s_i$ between each three quaternion

$s_i = q_i\exp(-\frac{\log(q^*_iq_{i+1}) + \log(q^*_iq_{i-1})}{4}).$

引数

q0	the first quaternion.
q1	the second quaternion.
q2	the third quaternion.
assumeUnit	if QUAT_ASSUME_UNIT, all input quaternions assume to be unit quaternion. Otherwise, all input quaternions will be normalized inside the function.

参照: squad

◆ inv()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::inv ( QuatAssumeType assumeUnit = QUAT_ASSUME_NOT_UNIT ) const

return $q^{-1}$ which is an inverse of $q$ satisfying $q * q^{-1} = 1$ .

引数

assumeUnit if QUAT_ASSUME_UNIT, quaternion q assume to be a unit quaternion and this function will save some computations.

For example

Quatd q(1,2,3,4);
q.inv();
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
q = q.normalize();
q.inv(assumeUnit);  //assumeUnit means p is a unit quaternion

◆ isNormal()

template<typename _Tp >

bool cv::Quat< _Tp >::isNormal ( _Tp eps = CV_QUAT_EPS ) const

return true if this quaternion is a unit quaternion.

引数

eps	tolerance scope of normalization. The eps could be defined as

$eps = |1 - dotValue|$

where

$dotValue = (this.w^2 + this.x^2 + this,y^2 + this.z^2).$

And this function will consider it is normalized when the dotValue over a range $[1-eps, 1+eps]$ .

◆ lerp()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::lerp	(	const Quat< _Tp > &	q0,
		const Quat< _Tp > &	q1,
		const _Tp	t
	)

static

To calculate the interpolation from $q_0$ to $q_1$ by Linear Interpolation(Nlerp) For two quaternions, this interpolation curve can be displayed as:

$Lerp(q_0, q_1, t) = (1 - t)q_0 + tq_1.$

Obviously, the lerp will interpolate along a straight line if we think of $q_0$ and $q_1$ as a vector in a two-dimensional space. When $t = 0$ , it returns $q_0$ and when $t= 1$ , it returns $q_1$ . $t$ should to be ranged in $[0, 1]$ normally.

引数

q0	a quaternion used in linear interpolation.
q1	a quaternion used in linear interpolation.
t	percent of vector $\overrightarrow{q_0q_1}$ over a range [0, 1].

覚え書き: it returns a non-unit quaternion.

◆ log()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::log ( QuatAssumeType assumeUnit = QUAT_ASSUME_NOT_UNIT ) const

return the value of logarithm function.

$\ln(q) = \ln||q|| + \frac{\boldsymbol{v}}{||\boldsymbol{v}||}\arccos\frac{w}{||q||}$

. where $\boldsymbol{v} = [x, y, z].$

引数

assumeUnit if QUAT_ASSUME_UNIT, this quaternion assume to be a unit quaternion and this function will save some computations.

For example

Quatd q(1,2,3,4);
q.log();
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
Quatd q1(1,2,3,4);
q1.normalize().log(assumeUnit);

◆ nlerp()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::nlerp	(	const Quat< _Tp > &	q0,
		const Quat< _Tp > &	q1,
		const _Tp	t,
		QuatAssumeType	assumeUnit = `QUAT_ASSUME_NOT_UNIT`
	)

static

To calculate the interpolation from $q_0$ to $q_1$ by Normalized Linear Interpolation(Nlerp). it returns a normalized quaternion of Linear Interpolation(Lerp).

$Nlerp(q_0, q_1, t) = \frac{(1 - t)q_0 + tq_1}{||(1 - t)q_0 + tq_1||}.$

The interpolation will always choose the shortest path but the constant speed is not guaranteed.

引数

q0	a quaternion used in normalized linear interpolation.
q1	a quaternion used in normalized linear interpolation.
t	percent of vector $\overrightarrow{q_0q_1}$ over a range [0, 1].
assumeUnit	if QUAT_ASSUME_UNIT, all input quaternions assume to be unit quaternion. Otherwise, all inputs quaternion will be normalized inside the function.

参照: lerp

◆ norm()

template<typename _Tp >

_Tp cv::Quat< _Tp >::norm ( ) const

return the norm of quaternion.

$||q|| = \sqrt{w^2 + x^2 + y^2 + z^2}.$

◆ normalize()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::normalize ( ) const

return a normalized $p$ .

$p = \frac{q}{||q||}$

where $p$ satisfies $(p.x)^2 + (p.y)^2 + (p.z)^2 + (p.w)^2 = 1.$

◆ operator*()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::operator* ( const Quat< _Tp > & ) const

Multiplication operator of two quaternions q and p. Multiplies values on either side of the operator.

Rule of quaternion multiplication:

$\begin{equation} \begin{split} p * q &= [p_0, \boldsymbol{u}]*[q_0, \boldsymbol{v}]\\ &=[p_0q_0 - \boldsymbol{u}\cdot \boldsymbol{v}, p_0\boldsymbol{v} + q_0\boldsymbol{u}+ \boldsymbol{u}\times \boldsymbol{v}]. \end{split} \end{equation}$

where $\cdot$ means dot product and $\times$ means cross product.

For example

Quatd p{1, 2, 3, 4};
Quatd q{5, 6, 7, 8};
std::cout << p * q << std::endl; //[-60, 12, 30, 24]

◆ operator*=() [1/2]

template<typename _Tp >

Quat< _Tp > & cv::Quat< _Tp >::operator*= ( const _Tp s )

Multiplication assignment operator of a quaternions and a scalar. It multiplies right operand with the left operand and assign the result to left operand.

Rule of quaternion multiplication with a scalar:

$\begin{equation} \begin{split} p * s &= [w, x, y, z] * s\\ &=[w * s, x * s, y * s, z * s]. \end{split} \end{equation}$

For example

Quatd p{1, 2, 3, 4};
double s = 2.0;
p *= s; // equivalent to p = p * s
std::cout << p << std::endl; //[2.0, 4.0, 6.0, 8.0]

覚え書き: the type of scalar should be equal to the quaternion.

◆ operator*=() [2/2]

template<typename _Tp >

Quat< _Tp > & cv::Quat< _Tp >::operator*= ( const Quat< _Tp > & )

Multiplication assignment operator of two quaternions q and p. It multiplies right operand with the left operand and assign the result to left operand.

Rule of quaternion multiplication:

$\begin{equation} \begin{split} p * q &= [p_0, \boldsymbol{u}]*[q_0, \boldsymbol{v}]\\ &=[p_0q_0 - \boldsymbol{u}\cdot \boldsymbol{v}, p_0\boldsymbol{v} + q_0\boldsymbol{u}+ \boldsymbol{u}\times \boldsymbol{v}]. \end{split} \end{equation}$

where $\cdot$ means dot product and $\times$ means cross product.

For example

Quatd p{1, 2, 3, 4};
Quatd q{5, 6, 7, 8};
p *= q; // equivalent to p = p * q
std::cout << p << std::endl; //[-60, 12, 30, 24]

◆ operator+()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::operator+ ( const Quat< _Tp > & ) const

Addition operator of two quaternions p and q. It returns a new quaternion that each value is the sum of $p_i$ and $q_i$ .

For example

Quatd p{1, 2, 3, 4};
Quatd q{5, 6, 7, 8};
std::cout << p + q << std::endl; //[6, 8, 10, 12]

◆ operator+=()

template<typename _Tp >

Quat< _Tp > & cv::Quat< _Tp >::operator+= ( const Quat< _Tp > & )

Addition assignment operator of two quaternions p and q. It adds right operand to the left operand and assign the result to left operand.

For example

Quatd p{1, 2, 3, 4};
Quatd q{5, 6, 7, 8};
p += q; // equivalent to p = p + q
std::cout << p << std::endl; //[6, 8, 10, 12]

◆ operator-() [1/2]

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::operator- ( ) const

Return opposite quaternion $-p$ which satisfies $p + (-p) = 0.$

For example

Quatd q{1, 2, 3, 4};

std::cout << -q << std::endl; // [-1, -2, -3, -4]

◆ operator-() [2/2]

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::operator- ( const Quat< _Tp > & ) const

Subtraction operator of two quaternions p and q. It returns a new quaternion that each value is the sum of $p_i$ and $-q_i$ .

For example

Quatd p{1, 2, 3, 4};
Quatd q{5, 6, 7, 8};
std::cout << p - q << std::endl; //[-4, -4, -4, -4]

◆ operator-=()

template<typename _Tp >

Quat< _Tp > & cv::Quat< _Tp >::operator-= ( const Quat< _Tp > & )

Subtraction assignment operator of two quaternions p and q. It subtracts right operand from the left operand and assign the result to left operand.

For example

Quatd p{1, 2, 3, 4};
Quatd q{5, 6, 7, 8};
p -= q; // equivalent to p = p - q
std::cout << p << std::endl; //[-4, -4, -4, -4]

◆ operator/() [1/2]

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::operator/ ( const _Tp s ) const

Division operator of a quaternions and a scalar. It divides left operand with the right operand and assign the result to left operand.

Rule of quaternion division with a scalar:

$\begin{equation} \begin{split} p / s &= [w, x, y, z] / s\\ &=[w/s, x/s, y/s, z/s]. \end{split} \end{equation}$

For example

Quatd p{1, 2, 3, 4};
double s = 2.0;
p /= s; // equivalent to p = p / s
std::cout << p << std::endl; //[0.5, 1, 1.5, 2]

覚え書き: the type of scalar should be equal to this quaternion.

◆ operator/() [2/2]

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::operator/ ( const Quat< _Tp > & ) const

Division operator of two quaternions p and q. Divides left hand operand by right hand operand.

Rule of quaternion division with a scalar:

$\begin{equation} \begin{split} p / q &= p * q.inv()\\ \end{split} \end{equation}$

For example

Quatd p{1, 2, 3, 4};
Quatd q{5, 6, 7, 8};
std::cout << p / q << std::endl; // equivalent to p * q.inv()

◆ operator/=() [1/2]

template<typename _Tp >

Quat< _Tp > & cv::Quat< _Tp >::operator/= ( const _Tp s )

Division assignment operator of a quaternions and a scalar. It divides left operand with the right operand and assign the result to left operand.

Rule of quaternion division with a scalar:

$\begin{equation} \begin{split} p / s &= [w, x, y, z] / s\\ &=[w / s, x / s, y / s, z / s]. \end{split} \end{equation}$

For example

Quatd p{1, 2, 3, 4};
double s = 2.0;;
p /= s; // equivalent to p = p / s
std::cout << p << std::endl; //[0.5, 1.0, 1.5, 2.0]

覚え書き: the type of scalar should be equal to the quaternion.

◆ operator/=() [2/2]

template<typename _Tp >

Quat< _Tp > & cv::Quat< _Tp >::operator/= ( const Quat< _Tp > & )

Division assignment operator of two quaternions p and q; It divides left operand with the right operand and assign the result to left operand.

Rule of quaternion division with a quaternion:

$\begin{equation} \begin{split} p / q&= p * q.inv()\\ \end{split} \end{equation}$

For example

Quatd p{1, 2, 3, 4};
Quatd q{5, 6, 7, 8};
p /= q; // equivalent to p = p * q.inv()
std::cout << p << std::endl;

◆ power() [1/2]

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::power	(	const _Tp	x,
		QuatAssumeType	assumeUnit = `QUAT_ASSUME_NOT_UNIT`
	)		const

return the value of power function with index $x$ .

$q^x = ||q||(\cos(x\theta) + \boldsymbol{u}\sin(x\theta))).$

引数

x	index of exponentiation.
assumeUnit	if QUAT_ASSUME_UNIT, this quaternion assume to be a unit quaternion and this function will save some computations.

For example

Quatd q(1,2,3,4);
q.power(2.0);
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
double angle = CV_PI;
Vec3d axis{0, 0, 1};
Quatd q1 = Quatd::createFromAngleAxis(angle, axis); //generate a unit quat by axis and angle
q1.power(2.0, assumeUnit); //This assumeUnt means q1 is a unit quaternion

◆ power() [2/2]

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::power	(	const Quat< _Tp > &	q,
		QuatAssumeType	assumeUnit = `QUAT_ASSUME_NOT_UNIT`
	)		const

return the value of power function with quaternion $q$ .

$p^q = e^{q\ln(p)}.$

引数

q	index quaternion of power function.
assumeUnit	if QUAT_ASSUME_UNIT, this quaternion assume to be a unit quaternion and this function will save some computations.

For example

Quatd p(1,2,3,4);
Quatd q(5,6,7,8);
p.power(q);
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
p = p.normalize();
p.power(q, assumeUnit); //This assumeUnit means p is a unit quaternion

◆ sin()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::sin ( ) const

return sin value of this quaternion, sin could be calculated as:

$\sin(p) = \sin(w) * \cosh(||\boldsymbol{v}||) + \cos(w)\frac{\boldsymbol{v}}{||\boldsymbol{v}||}\sinh(||\boldsymbol{v}||)$

where $\boldsymbol{v} = [x, y, z].$

For example

Quatd q(1,2,3,4);

q.sin();

◆ sinh()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::sinh ( ) const

return sinh value of this quaternion, sinh could be calculated as: $\sinh(p) = \sin(w)\cos(||\boldsymbol{v}||) + \cosh(w)\frac{v}{||\boldsymbol{v}||}\sin||\boldsymbol{v}||$ where $\boldsymbol{v} = [x, y, z].$

For example

Quatd q(1,2,3,4);

q.sinh();

◆ slerp()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::slerp	(	const Quat< _Tp > &	q0,
		const Quat< _Tp > &	q1,
		const _Tp	t,
		QuatAssumeType	assumeUnit = `QUAT_ASSUME_NOT_UNIT`,
		bool	directChange = `true`
	)

static

To calculate the interpolation between $q_0$ and $q_1$ by Spherical Linear Interpolation(Slerp), which can be defined as:

$Slerp(q_0, q_1, t) = \frac{\sin((1-t)\theta)}{\sin(\theta)}q_0 + \frac{\sin(t\theta)}{\sin(\theta)}q_1$

where $\theta$ can be calculated as:

$\theta=cos^{-1}(q_0\cdot q_1)$

resulting from the both of their norm is unit.

引数

q0	a quaternion used in Slerp.
q1	a quaternion used in Slerp.
t	percent of angle between and over a range [0, 1].
assumeUnit	if QUAT_ASSUME_UNIT, all input quaternions assume to be unit quaternions. Otherwise, all input quaternions will be normalized inside the function.
directChange	if QUAT_ASSUME_UNIT, the interpolation will choose the nearest path.

覚え書き: If the interpolation angle is small, the error between Nlerp and Slerp is not so large. To improve efficiency and avoid zero division error, we use Nlerp instead of Slerp.

◆ spline()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::spline	(	const Quat< _Tp > &	q0,
		const Quat< _Tp > &	q1,
		const Quat< _Tp > &	q2,
		const Quat< _Tp > &	q3,
		const _Tp	t,
		QuatAssumeType	assumeUnit = `QUAT_ASSUME_NOT_UNIT`
	)

static

to calculate a quaternion which is the result of a $C^1$ continuous spline curve constructed by squad at the ratio t. Here, the interpolation values are between $q_1$ and $q_2$ . $q_0$ and $q_2$ are used to ensure the $C^1$ continuity. if t = 0, it returns $q_1$ , if t = 1, it returns $q_2$ .

引数

q0	the first input quaternion to ensure continuity.
q1	the second input quaternion.
q2	the third input quaternion.
q3	the fourth input quaternion the same use of .
t	ratio over a range [0, 1].
assumeUnit	if QUAT_ASSUME_UNIT, assume to be unit quaternion. Otherwise, all input quaternions will be normalized inside the function.

For example:

If there are three double quaternions $v_0, v_1, v_2$ waiting to be interpolated.

Interpolation between $v_0$ and $v_1$ with a ratio $t_0$ could be calculated as

Quatd::spline(v0, v0, v1, v2, t0);

Interpolation between $v_1$ and $v_2$ with a ratio $t_0$ could be calculated as

Quatd::spline(v0, v1, v2, v2, t0);

参照: squad, slerp

◆ sqrt()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::sqrt ( QuatAssumeType assumeUnit = QUAT_ASSUME_NOT_UNIT ) const

return $\sqrt{q}$ .

引数

assumeUnit if QUAT_ASSUME_UNIT, this quaternion assume to be a unit quaternion and this function will save some computations.

For example

Quatf q(1,2,3,4);
q.sqrt();
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
q = {1,0,0,0};
q.sqrt(assumeUnit); //This assumeUnit means q is a unit quaternion

◆ squad()

template<typename _Tp >

static Quat< _Tp > cv::Quat< _Tp >::squad	(	const Quat< _Tp > &	q0,
		const Quat< _Tp > &	s0,
		const Quat< _Tp > &	s1,
		const Quat< _Tp > &	q1,
		const _Tp	t,
		QuatAssumeType	assumeUnit = `QUAT_ASSUME_NOT_UNIT`,
		bool	directChange = `true`
	)

static

To calculate the interpolation between $q_0$ , $q_1$ , $q_2$ , $q_3$ by Spherical and quadrangle(Squad). This could be defined as:

$Squad(q_i, s_i, s_{i+1}, q_{i+1}, t) = Slerp(Slerp(q_i, q_{i+1}, t), Slerp(s_i, s_{i+1}, t), 2t(1-t))$

where

$s_i = q_i\exp(-\frac{\log(q^*_iq_{i+1}) + \log(q^*_iq_{i-1})}{4})$

The Squad expression is analogous to the $B\acute{e}zier$ curve, but involves spherical linear interpolation instead of simple linear interpolation. Each $s_i$ needs to be calculated by three quaternions.

引数

q0	the first quaternion.
s0	the second quaternion.
s1	the third quaternion.
q1	thr fourth quaternion.
t	interpolation parameter of quadratic and linear interpolation over a range .
assumeUnit	if QUAT_ASSUME_UNIT, all input quaternions assume to be unit quaternion. Otherwise, all input quaternions will be normalized inside the function.
directChange	if QUAT_ASSUME_UNIT, squad will find the nearest path to interpolate.

参照: interPoint, spline

◆ tan()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::tan ( ) const

return tan value of this quaternion, tan could be calculated as:

$\tan(q) = \frac{\sin(q)}{\cos(q)}.$

For example

Quatd q(1,2,3,4);

q.tan();

◆ tanh()

template<typename _Tp >

Quat< _Tp > cv::Quat< _Tp >::tanh ( ) const

return tanh value of this quaternion, tanh could be calculated as:

$\tanh(q) = \frac{\sinh(q)}{\cosh(q)}.$

For example

Quatd q(1,2,3,4);

q.tanh();

参照: sinh, cosh

◆ toEulerAngles()

template<typename _Tp >

Vec< _Tp, 3 > cv::Quat< _Tp >::toEulerAngles ( QuatEnum::EulerAnglesType eulerAnglesType )

Transform a quaternion q to Euler angles.

When transforming a quaternion $q = w + x\boldsymbol{i} + y\boldsymbol{j} + z\boldsymbol{k}$ to Euler angles, rotation matrix M can be calculated by:

$\begin{aligned} {M} &={\begin{bmatrix}1-2(y^{2}+z^{2})&2(xy-zx)&2(xz+yw)\\2(xy+zw)&1-2(x^{2}+z^{2})&2(yz-xw)\\2(xz-yw)&2(yz+xw)&1-2(x^{2}+y^{2})\end{bmatrix}}\end{aligned}.$

On the other hand, the rotation matrix can be obtained from Euler angles. Using intrinsic rotations with Euler angles type XYZ as an example, $\theta_1$ , $\theta_2$ , $\theta_3$ are three angles for Euler angles, the rotation matrix R can be calculated by:

$R =X(\theta_1)Y(\theta_2)Z(\theta_3) ={\begin{bmatrix}\cos\theta_{2}\cos\theta_{3}&-\cos\theta_{2}\sin\theta_{3}&\sin\theta_{2}\\\cos\theta_{1}\sin\theta_{3}+\cos\theta_{3}\sin\theta_{1}\sin\theta_{2}&\cos\theta_{1}\cos\theta_{3}-\sin\theta_{1}\sin\theta_{2}\sin\theta_{3}&-\cos\theta_{2}\sin\theta_{1}\\\sin\theta_{1}\sin\theta_{3}-\cos\theta_{1}\cos\theta_{3}\sin\theta_{2}&\cos\theta_{3}\sin\theta_{1}+\cos\theta_{1}\sin\theta_{2}\sin\theta_{3}&\cos\theta_{1}\cos_{2}\end{bmatrix}}$

Rotation matrix M and R are equal. As long as $s_{2} \neq 1$ , by comparing each element of two matrices ,the solution is $\begin{cases} \theta_1 = \arctan2(-m_{23},m_{33})\\\theta_2 = arcsin(m_{13}) \\\theta_3 = \arctan2(-m_{12},m_{11}) \end{cases}$ .

When $s_{2}=1$ or $s_{2}=-1$ , the gimbal lock occurs. The function will prompt "WARNING: Gimbal Lock will occur. Euler angles is non-unique. For intrinsic rotations, we set the third angle to 0, and for external rotation, we set the first angle to 0.".

When $s_{2}=1$ , The rotation matrix R is $R = {\begin{bmatrix}0&0&1\\\sin(\theta_1+\theta_3)&\cos(\theta_1+\theta_3)&0\\-\cos(\theta_1+\theta_3)&\sin(\theta_1+\theta_3)&0\end{bmatrix}}$ .

The number of solutions is infinite with the condition $\begin{cases} \theta_1+\theta_3 = \arctan2(m_{21},m_{22})\\ \theta_2=\pi/2 \end{cases}\$ .

We set $\theta_3 = 0$ , the solution is $\begin{cases} \theta_1=\arctan2(m_{21},m_{22})\\ \theta_2=\pi/2\\ \theta_3=0 \end{cases}$ .

When $s_{2}=-1$ , The rotation matrix R is $X_{1}Y_{2}Z_{3}={\begin{bmatrix}0&0&-1\\-\sin(\theta_1-\theta_3)&\cos(\theta_1-\theta_3)&0\\\cos(\theta_1-\theta_3)&\sin(\theta_1-\theta_3)&0\end{bmatrix}}$ .

The number of solutions is infinite with the condition $\begin{cases} \theta_1+\theta_3 = \arctan2(m_{32},m_{22})\\ \theta_2=\pi/2 \end{cases}\$ .

We set $\theta_3 = 0$ , the solution is $\begin{cases}\theta_1=\arctan2(m_{32},m_{22}) \\ \theta_2=-\pi/2\\ \theta_3=0\end{cases}$ .

Since $sin \theta\in [-1,1]$ and $cos \theta \in [-1,1]$ , the unnormalized quaternion will cause computational troubles. For this reason, this function will normalize the quaternion at first and QuatAssumeType is not needed.

When the gimbal lock occurs, we set $\theta_3 = 0$ for intrinsic rotations or $\theta_1 = 0$ for extrinsic rotations.

As a result, for every Euler angles type, we can get solution as shown in the following table.

EulerAnglesType	Ordinary	$\theta_2 = π/2$	$\theta_2 = -π/2$
INT_XYZ	$\theta_1 = \arctan2(-m_{23},m_{33})\\\theta_2 = \arcsin(m_{13}) \\\theta_3= \arctan2(-m_{12},m_{11})$	$\theta_1=\arctan2(m_{21},m_{22})\\ \theta_2=\pi/2\\ \theta_3=0$	$\theta_1=\arctan2(m_{32},m_{22})\\ \theta_2=-\pi/2\\ \theta_3=0$
INT_XZY	$\theta_1 = \arctan2(m_{32},m_{22})\\\theta_2 = -\arcsin(m_{12}) \\\theta_3= \arctan2(m_{13},m_{11})$	$\theta_1=\arctan2(m_{31},m_{33})\\ \theta_2=\pi/2\\ \theta_3=0$	$\theta_1=\arctan2(-m_{23},m_{33})\\ \theta_2=-\pi/2\\ \theta_3=0$
INT_YXZ	$\theta_1 = \arctan2(m_{13},m_{33})\\\theta_2 = -\arcsin(m_{23}) \\\theta_3= \arctan2(m_{21},m_{22})$	$\theta_1=\arctan2(m_{12},m_{11})\\ \theta_2=\pi/2\\ \theta_3=0$	$\theta_1=\arctan2(-m_{12},m_{11})\\ \theta_2=-\pi/2\\ \theta_3=0$
INT_YZX	$\theta_1 = \arctan2(-m_{31},m_{11})\\\theta_2 = \arcsin(m_{21}) \\\theta_3= \arctan2(-m_{23},m_{22})$	$\theta_1=\arctan2(m_{13},m_{33})\\ \theta_2=\pi/2\\ \theta_3=0$	$\theta_1=\arctan2(m_{13},m_{12})\\ \theta_2=-\pi/2\\ \theta_3=0$
INT_ZXY	$\theta_1 = \arctan2(-m_{12},m_{22})\\\theta_2 = \arcsin(m_{32}) \\\theta_3= \arctan2(-m_{31},m_{33})$	$\theta_1=\arctan2(m_{21},m_{11})\\ \theta_2=\pi/2\\ \theta_3=0$	$\theta_1=\arctan2(m_{21},m_{11})\\ \theta_2=-\pi/2\\ \theta_3=0$
INT_ZYX	$\theta_1 = \arctan2(m_{21},m_{11})\\\theta_2 = \arcsin(-m_{31}) \\\theta_3= \arctan2(m_{32},m_{33})$	$\theta_1=\arctan2(m_{23},m_{22})\\ \theta_2=\pi/2\\ \theta_3=0$	$\theta_1=\arctan2(-m_{12},m_{22})\\ \theta_2=-\pi/2\\ \theta_3=0$
EXT_XYZ	$\theta_1 = \arctan2(m_{32},m_{33})\\\theta_2 = \arcsin(-m_{31}) \\\ \theta_3 = \arctan2(m_{21},m_{11})$	$\theta_1= 0\\ \theta_2=\pi/2\\ \theta_3=\arctan2(m_{23},m_{22})$	$\theta_1=0\\ \theta_2=-\pi/2\\ \theta_3=\arctan2(-m_{12},m_{22})$
EXT_XZY	$\theta_1 = \arctan2(-m_{23},m_{22})\\\theta_2 = \arcsin(m_{21}) \\\theta_3= \arctan2(-m_{31},m_{11})$	$\theta_1= 0\\ \theta_2=\pi/2\\ \theta_3=\arctan2(m_{13},m_{33})$	$\theta_1=0\\ \theta_2=-\pi/2\\ \theta_3=\arctan2(m_{13},m_{12})$
EXT_YXZ	$\theta_1 = \arctan2(-m_{31},m_{33}) \\\theta_2 = \arcsin(m_{32}) \\\theta_3= \arctan2(-m_{12},m_{22})$	$\theta_1= 0\\ \theta_2=\pi/2\\ \theta_3=\arctan2(m_{21},m_{11})$	$\theta_1=0\\ \theta_2=-\pi/2\\ \theta_3=\arctan2(m_{21},m_{11})$
EXT_YZX	$\theta_1 = \arctan2(m_{13},m_{11})\\\theta_2 = -\arcsin(m_{12}) \\\theta_3= \arctan2(m_{32},m_{22})$	$\theta_1= 0\\ \theta_2=\pi/2\\ \theta_3=\arctan2(m_{31},m_{33})$	$\theta_1=0\\ \theta_2=-\pi/2\\ \theta_3=\arctan2(-m_{23},m_{33})$
EXT_ZXY	$\theta_1 = \arctan2(m_{21},m_{22})\\\theta_2 = -\arcsin(m_{23}) \\\theta_3= \arctan2(m_{13},m_{33})$	$\theta_1= 0\\ \theta_2=\pi/2\\ \theta_3=\arctan2(m_{12},m_{11})$	$\theta_1= 0\\ \theta_2=-\pi/2\\ \theta_3=\arctan2(-m_{12},m_{11})$
EXT_ZYX	$\theta_1 = \arctan2(-m_{12},m_{11})\\\theta_2 = \arcsin(m_{13}) \\\theta_3= \arctan2(-m_{23},m_{33})$	$\theta_1=0\\ \theta_2=\pi/2\\ \theta_3=\arctan2(m_{21},m_{22})$	$\theta_1=0\\ \theta_2=-\pi/2\\ \theta_3=\arctan2(m_{32},m_{22})$

EulerAnglesType	Ordinary	$\theta_2 = 0$	$\theta_2 = π$
INT_XYX	$\theta_1 = \arctan2(m_{21},-m_{31})\\\theta_2 =\arccos(m_{11}) \\\theta_3 = \arctan2(m_{12},m_{13})$	$\theta_1=\arctan2(m_{32},m_{33})\\ \theta_2=0\\ \theta_3=0$	$\theta_1=\arctan2(m_{23},m_{22})\\ \theta_2=\pi\\ \theta_3=0$
INT_XZX	$\theta_1 = \arctan2(m_{31},m_{21})\\\theta_2 = \arccos(m_{11}) \\\theta_3 = \arctan2(m_{13},-m_{12})$	$\theta_1=\arctan2(m_{32},m_{33})\\ \theta_2=0\\ \theta_3=0$	$\theta_1=\arctan2(-m_{32},m_{33})\\ \theta_2=\pi\\ \theta_3=0$
INT_YXY	$\theta_1 = \arctan2(m_{12},m_{32})\\\theta_2 = \arccos(m_{22}) \\\theta_3 = \arctan2(m_{21},-m_{23})$	$\theta_1=\arctan2(m_{13},m_{11})\\ \theta_2=0\\ \theta_3=0$	$\theta_1=\arctan2(-m_{31},m_{11})\\ \theta_2=\pi\\ \theta_3=0$
INT_YZY	$\theta_1 = \arctan2(m_{32},-m_{12})\\\theta_2 = \arccos(m_{22}) \\\theta_3 =\arctan2(m_{23},m_{21})$	$\theta_1=\arctan2(m_{13},m_{11})\\ \theta_2=0\\ \theta_3=0$	$\theta_1=\arctan2(m_{13},-m_{11})\\ \theta_2=\pi\\ \theta_3=0$
INT_ZXZ	$\theta_1 = \arctan2(-m_{13},m_{23})\\\theta_2 = \arccos(m_{33}) \\\theta_3 =\arctan2(m_{31},m_{32})$	$\theta_1=\arctan2(m_{21},m_{22})\\ \theta_2=0\\ \theta_3=0$	$\theta_1=\arctan2(m_{21},m_{11})\\ \theta_2=\pi\\ \theta_3=0$
INT_ZYZ	$\theta_1 = \arctan2(m_{23},m_{13})\\\theta_2 = \arccos(m_{33}) \\\theta_3 = \arctan2(m_{32},-m_{31})$	$\theta_1=\arctan2(m_{21},m_{11})\\ \theta_2=0\\ \theta_3=0$	$\theta_1=\arctan2(m_{21},m_{11})\\ \theta_2=\pi\\ \theta_3=0$
EXT_XYX	$\theta_1 = \arctan2(m_{12},m_{13}) \\\theta_2 = \arccos(m_{11}) \\\theta_3 = \arctan2(m_{21},-m_{31})$	$\theta_1=0\\ \theta_2=0\\ \theta_3=\arctan2(m_{32},m_{33})$	$\theta_1= 0\\ \theta_2=\pi\\ \theta_3= \arctan2(m_{23},m_{22})$
EXT_XZX	$\theta_1 = \arctan2(m_{13},-m_{12})\\\theta_2 = \arccos(m_{11}) \\\theta_3 = \arctan2(m_{31},m_{21})$	$\theta_1= 0\\ \theta_2=0\\ \theta_3=\arctan2(m_{32},m_{33})$	$\theta_1= 0\\ \theta_2=\pi\\ \theta_3=\arctan2(-m_{32},m_{33})$
EXT_YXY	$\theta_1 = \arctan2(m_{21},-m_{23})\\\theta_2 = \arccos(m_{22}) \\\theta_3 = \arctan2(m_{12},m_{32})$	$\theta_1= 0\\ \theta_2=0\\ \theta_3=\arctan2(m_{13},m_{11})$	$\theta_1= 0\\ \theta_2=\pi\\ \theta_3=\arctan2(-m_{31},m_{11})$
EXT_YZY	$\theta_1 = \arctan2(m_{23},m_{21}) \\\theta_2 = \arccos(m_{22}) \\\theta_3 = \arctan2(m_{32},-m_{12})$	$\theta_1= 0\\ \theta_2=0\\ \theta_3=\arctan2(m_{13},m_{11})$	$\theta_1=0\\ \theta_2=\pi\\ \theta_3=\arctan2(m_{13},-m_{11})$
EXT_ZXZ	$\theta_1 = \arctan2(m_{31},m_{32}) \\\theta_2 = \arccos(m_{33}) \\\theta_3 = \arctan2(-m_{13},m_{23})$	$\theta_1=0\\ \theta_2=0\\ \theta_3=\arctan2(m_{21},m_{22})$	$\theta_1= 0\\ \theta_2=\pi\\ \theta_3=\arctan2(m_{21},m_{11})$
EXT_ZYZ	$\theta_1 = \arctan2(m_{32},-m_{31})\\\theta_2 = \arccos(m_{33}) \\\theta_3 = \arctan2(m_{23},m_{13})$	$\theta_1=0\\ \theta_2=0\\ \theta_3=\arctan2(m_{21},m_{11})$	$\theta_1= 0\\ \theta_2=\pi\\ \theta_3=\arctan2(m_{21},m_{11})$

引数

eulerAnglesType the convertion Euler angles type

◆ toRotMat3x3()

template<typename _Tp >

Matx< _Tp, 3, 3 > cv::Quat< _Tp >::toRotMat3x3 ( QuatAssumeType assumeUnit = QUAT_ASSUME_NOT_UNIT ) const

transform a quaternion to a 3x3 rotation matrix.

引数

assumeUnit if QUAT_ASSUME_UNIT, this quaternion assume to be a unit quaternion and this function will save some computations. Otherwise, this function will normalize this quaternion at first then do the transformation.

覚え書き: Matrix A which is to be rotated should have the form
$\begin{bmatrix} x_0& x_1& x_2&...&x_n\\ y_0& y_1& y_2&...&y_n\\ z_0& z_1& z_2&...&z_n \end{bmatrix}$
where the same subscript represents a point. The shape of A assume to be [3, n] The points matrix A can be rotated by toRotMat3x3() * A. The result has 3 rows and n columns too.

For example

double angle = CV_PI;
Vec3d axis{0,0,1};
Quatd q_unit = Quatd::createFromAngleAxis(angle, axis); //quaternion could also be get by interpolation by two or more quaternions.
 
//assume there is two points (1,0,0) and (1,0,1) to be rotated
Mat pointsA = (Mat_<double>(2, 3) << 1,0,0,1,0,1);
//change the shape
pointsA = pointsA.t();
// rotate 180 degrees around the z axis
Mat new_point = q_unit.toRotMat3x3() * pointsA;
// print two points
cout << new_point << endl;

◆ toRotMat4x4()

template<typename _Tp >

Matx< _Tp, 4, 4 > cv::Quat< _Tp >::toRotMat4x4 ( QuatAssumeType assumeUnit = QUAT_ASSUME_NOT_UNIT ) const

transform a quaternion to a 4x4 rotation matrix.

引数

assumeUnit if QUAT_ASSUME_UNIT, this quaternion assume to be a unit quaternion and this function will save some computations. Otherwise, this function will normalize this quaternion at first then do the transformation.

The operations is similar as toRotMat3x3 except that the points matrix should have the form

$\begin{bmatrix} x_0& x_1& x_2&...&x_n\\ y_0& y_1& y_2&...&y_n\\ z_0& z_1& z_2&...&z_n\\ 0&0&0&...&0 \end{bmatrix}$

参照: toRotMat3x3

◆ toRotVec()

template<typename _Tp >

Vec< _Tp, 3 > cv::Quat< _Tp >::toRotVec ( QuatAssumeType assumeUnit = QUAT_ASSUME_NOT_UNIT ) const

transform this quaternion to a Rotation vector.

引数

assumeUnit

if QUAT_ASSUME_UNIT, this quaternion assume to be a unit quaternion and this function will save some computations. Rotation vector rVec is defined as:

$rVec = [\theta v_x, \theta v_y, \theta v_z]$

where $\theta$ represents rotation angle, and $\boldsymbol{v}$ represents the normalized rotation axis.

For example

Quatd q(1,2,3,4);
q.toRotVec();
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
q.normalize().toRotVec(assumeUnit); //answer is same as q.toRotVec().

◆ toVec()

template<typename _Tp >

Vec< _Tp, 4 > cv::Quat< _Tp >::toVec ( ) const

transform the this quaternion to a Vec<T, 4>.

For example

Quatd q(1,2,3,4);

q.toVec();

フレンドと関連関数の詳解

◆ acos

template<typename _Tp >

template<typename T >

Quat< T > acos ( const Quat< T > & q )

friend

return arccos value of quaternion q, arccos could be calculated as:

$\arccos(q) = -\frac{\boldsymbol{v}}{||\boldsymbol{v}||}arccosh(q)$

where $\boldsymbol{v} = [x, y, z].$

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

acos(q);

cv::Quat::acos

Quat< _Tp > acos() const

return arccos value of this quaternion, arccos could be calculated as:

◆ acosh

template<typename _Tp >

template<typename T >

Quat< T > acosh ( const Quat< T > & q )

friend

return arccosh value of quaternion q, arccosh could be calculated as:

$arccosh(q) = \ln(q + \sqrt{q^2 - 1})$

.

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

acosh(q);

cv::Quat::acosh

Quat< _Tp > acosh() const

return arccosh value of this quaternion, arccosh could be calculated as:

◆ asin

template<typename _Tp >

template<typename T >

Quat< T > asin ( const Quat< T > & q )

friend

return arcsin value of quaternion q, arcsin could be calculated as:

$\arcsin(q) = -\frac{\boldsymbol{v}}{||\boldsymbol{v}||}arcsinh(q\frac{\boldsymbol{v}}{||\boldsymbol{v}||})$

where $\boldsymbol{v} = [x, y, z].$

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

asin(q);

cv::Quat::asin

Quat< _Tp > asin() const

return arcsin value of this quaternion, arcsin could be calculated as:

◆ asinh

template<typename _Tp >

template<typename T >

Quat< T > asinh ( const Quat< T > & q )

friend

return arcsinh value of quaternion q, arcsinh could be calculated as:

$arcsinh(q) = \ln(q + \sqrt{q^2 + 1})$

.

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

asinh(q);

cv::Quat::asinh

Quat< _Tp > asinh() const

return arcsinh value of this quaternion, arcsinh could be calculated as:

◆ atan

template<typename _Tp >

template<typename T >

Quat< T > atan ( const Quat< T > & q )

friend

return arctan value of quaternion q, arctan could be calculated as:

$\arctan(q) = -\frac{\boldsymbol{v}}{||\boldsymbol{v}||}arctanh(q\frac{\boldsymbol{v}}{||\boldsymbol{v}||})$

where $\boldsymbol{v} = [x, y, z].$

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

atan(q);

cv::Quat::atan

Quat< _Tp > atan() const

return arctan value of this quaternion, arctan could be calculated as:

◆ atanh

template<typename _Tp >

template<typename T >

Quat< T > atanh ( const Quat< T > & q )

friend

return arctanh value of quaternion q, arctanh could be calculated as:

$arctanh(q) = \frac{\ln(q + 1) - \ln(1 - q)}{2}$

.

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

atanh(q);

cv::Quat::atanh

Quat< _Tp > atanh() const

return arctanh value of this quaternion, arctanh could be calculated as:

◆ cos

template<typename _Tp >

template<typename T >

Quat< T > cos ( const Quat< T > & q )

friend

return sin value of quaternion q, cos could be calculated as:

$\cos(p) = \cos(w) * \cosh(||\boldsymbol{v}||) - \sin(w)\frac{\boldsymbol{v}}{||\boldsymbol{v}||}\sinh(||\boldsymbol{v}||)$

where $\boldsymbol{v} = [x, y, z].$

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

cos(q);

cv::Quat::cos

Quat< _Tp > cos() const

return cos value of this quaternion, cos could be calculated as:

◆ cosh

template<typename _Tp >

template<typename T >

Quat< T > cosh ( const Quat< T > & q )

friend

return cosh value of quaternion q, cosh could be calculated as:

$\cosh(p) = \cosh(w) * \cos(||\boldsymbol{v}||) + \sinh(w)\frac{\boldsymbol{v}}{||\boldsymbol{v}||}\sin(||\boldsymbol{v}||)$

where $\boldsymbol{v} = [x, y, z].$

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

cosh(q);

cv::Quat::cosh

Quat< _Tp > cosh() const

return cosh value of this quaternion, cosh could be calculated as:

◆ crossProduct

template<typename _Tp >

template<typename T >

Quat< T > crossProduct	(	const Quat< T > &	p,
		const Quat< T > &	q
	)

friend

return the crossProduct between $p = (a, b, c, d) = (a, \boldsymbol{u})$ and $q = (w, x, y, z) = (w, \boldsymbol{v})$ .

$p \times q = \frac{pq- qp}{2}$

$p \times q = \boldsymbol{u} \times \boldsymbol{v}$

$p \times q = (cz-dy)i + (dx-bz)j + (by-xc)k$

For example

Quatd q{1,2,3,4};
Quatd p{5,6,7,8};
crossProduct(p, q);

◆ cv::operator* [1/2]

template<typename _Tp >

template<typename T >

Quat< T > cv::operator*	(	const Quat< T > &	,
		const T	s
	)

friend

Multiplication operator of a quaternion and a scalar. It multiplies right operand with the left operand and assign the result to left operand.

Rule of quaternion multiplication with a scalar:

$\begin{equation} \begin{split} p * s &= [w, x, y, z] * s\\ &=[w * s, x * s, y * s, z * s]. \end{split} \end{equation}$

For example

Quatd p{1, 2, 3, 4};
double s = 2.0;
std::cout << p * s << std::endl; //[2.0, 4.0, 6.0, 8.0]

覚え書き: the type of scalar should be equal to the quaternion.

◆ cv::operator* [2/2]

template<typename _Tp >

template<typename T >

Quat< T > cv::operator*	(	const T	s,
		const Quat< T > &
	)

friend

Multiplication operator of a scalar and a quaternions. It multiplies right operand with the left operand and assign the result to left operand.

Rule of quaternion multiplication with a scalar:

$\begin{equation} \begin{split} p * s &= [w, x, y, z] * s\\ &=[w * s, x * s, y * s, z * s]. \end{split} \end{equation}$

For example

Quatd p{1, 2, 3, 4};
double s = 2.0;
std::cout << s * p << std::endl; //[2.0, 4.0, 6.0, 8.0]

覚え書き: the type of scalar should be equal to the quaternion.

◆ cv::operator+ [1/2]

template<typename _Tp >

template<typename T >

Quat< T > cv::operator+	(	const Quat< T > &	,
		const T	s
	)

friend

Addition operator of a quaternions and a scalar. Adds right hand operand from left hand operand.

For example

Quatd p{1, 2, 3, 4};
double scalar = 2.0;
std::cout << p + scalar << std::endl; //[3.0, 2, 3, 4]

覚え書き: the type of scalar should be equal to the quaternion.

◆ cv::operator+ [2/2]

template<typename _Tp >

template<typename T >

Quat< T > cv::operator+	(	const T	s,
		const Quat< T > &
	)

friend

Addition operator of a quaternions and a scalar. Adds right hand operand from left hand operand.

For example

Quatd p{1, 2, 3, 4};
double scalar = 2.0;
std::cout << scalar + p << std::endl; //[3.0, 2, 3, 4]

覚え書き: the type of scalar should be equal to the quaternion.

◆ cv::operator- [1/2]

template<typename _Tp >

template<typename T >

Quat< T > cv::operator-	(	const Quat< T > &	,
		const T	s
	)

friend

Subtraction operator of a quaternions and a scalar. Subtracts right hand operand from left hand operand.

For example

Quatd p{1, 2, 3, 4};
double scalar = 2.0;
std::cout << p - scalar << std::endl; //[-1.0, 2, 3, 4]

覚え書き: the type of scalar should be equal to the quaternion.

◆ cv::operator- [2/2]

template<typename _Tp >

template<typename T >

Quat< T > cv::operator-	(	const T	s,
		const Quat< T > &
	)

friend

Subtraction operator of a scalar and a quaternions. Subtracts right hand operand from left hand operand.

For example

Quatd p{1, 2, 3, 4};
double scalar = 2.0;
std::cout << scalar - p << std::endl; //[1.0, -2, -3, -4]

覚え書き: the type of scalar should be equal to the quaternion.

◆ exp

template<typename _Tp >

template<typename T >

Quat< T > exp ( const Quat< T > & q )

friend

return the value of exponential value.

$\exp(q) = e^w (\cos||\boldsymbol{v}||+ \frac{v}{||\boldsymbol{v}||})\sin||\boldsymbol{v}||$

where $\boldsymbol{v} = [x, y, z].$

引数

q	a quaternion.

For example:

Quatd q{1,2,3,4};

cout << exp(q) << endl;

cv::Quat::exp

Quat< _Tp > exp() const

return the value of exponential value.

◆ inv

template<typename _Tp >

template<typename T >

Quat< T > inv	(	const Quat< T > &	q,
		QuatAssumeType	assumeUnit
	)

friend

return $q^{-1}$ which is an inverse of $q$ which satisfies $q * q^{-1} = 1$ .

引数

q	a quaternion.
assumeUnit	if QUAT_ASSUME_UNIT, quaternion q assume to be a unit quaternion and this function will save some computations.

For example

Quatd q(1,2,3,4);
inv(q);
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
q = q.normalize();
inv(q, assumeUnit);//This assumeUnit means p is a unit quaternion

◆ log

template<typename _Tp >

template<typename T >

Quat< T > log	(	const Quat< T > &	q,
		QuatAssumeType	assumeUnit
	)

friend

return the value of logarithm function.

$\ln(q) = \ln||q|| + \frac{\boldsymbol{v}}{||\boldsymbol{v}||}\arccos\frac{w}{||q||}.$

where $\boldsymbol{v} = [x, y, z].$

引数

q	a quaternion.
assumeUnit	if QUAT_ASSUME_UNIT, q assume to be a unit quaternion and this function will save some computations.

For example

Quatd q1{1,2,3,4};

cout << log(q1) << endl;

cv::Quat::log

friend Quat< T > log(const Quat< T > &q, QuatAssumeType assumeUnit)

return the value of logarithm function.

◆ power [1/2]

template<typename _Tp >

template<typename T >

Quat< T > power	(	const Quat< T > &	p,
		const Quat< T > &	q,
		QuatAssumeType	assumeUnit
	)

friend

return the value of power function with quaternion $q$ .

$p^q = e^{q\ln(p)}.$

引数

p	base quaternion of power function.
q	index quaternion of power function.
assumeUnit	if QUAT_ASSUME_UNIT, quaternion assume to be a unit quaternion and this function will save some computations.

For example

Quatd p(1,2,3,4);
Quatd q(5,6,7,8);
power(p, q);
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
p = p.normalize();
power(p, q, assumeUnit); //This assumeUnit means p is a unit quaternion

◆ power [2/2]

template<typename _Tp >

template<typename T >

Quat< T > power	(	const Quat< T > &	q,
		const T	x,
		QuatAssumeType	assumeUnit
	)

friend

return the value of power function with index $x$ .

$q^x = ||q||(cos(x\theta) + \boldsymbol{u}sin(x\theta))).$

引数

q	a quaternion.
x	index of exponentiation.
assumeUnit	if QUAT_ASSUME_UNIT, quaternion q assume to be a unit quaternion and this function will save some computations.

For example

Quatd q(1,2,3,4);
power(q, 2.0);
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
double angle = CV_PI;
Vec3d axis{0, 0, 1};
Quatd q1 = Quatd::createFromAngleAxis(angle, axis); //generate a unit quat by axis and angle
power(q1, 2.0, assumeUnit);//This assumeUnit means q1 is a unit quaternion.

覚え書き: the type of the index should be the same as the quaternion.

◆ sin

template<typename _Tp >

template<typename T >

Quat< T > sin ( const Quat< T > & q )

friend

return tanh value of quaternion q, sin could be calculated as:

$\sin(p) = \sin(w) * \cosh(||\boldsymbol{v}||) + \cos(w)\frac{\boldsymbol{v}}{||\boldsymbol{v}||}\sinh(||\boldsymbol{v}||)$

where $\boldsymbol{v} = [x, y, z].$

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

sin(q);

cv::Quat::sin

Quat< _Tp > sin() const

return sin value of this quaternion, sin could be calculated as:

◆ sinh

template<typename _Tp >

template<typename T >

Quat< T > sinh ( const Quat< T > & q )

friend

return sinh value of quaternion q, sinh could be calculated as:

$\sinh(p) = \sin(w)\cos(||\boldsymbol{v}||) + \cosh(w)\frac{v}{||\boldsymbol{v}||}\sin||\boldsymbol{v}||$

where $\boldsymbol{v} = [x, y, z].$

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

sinh(q);

cv::Quat::sinh

Quat< _Tp > sinh() const

return sinh value of this quaternion, sinh could be calculated as: where

◆ sqrt

template<typename _Tp >

template<typename T >

Quat< T > sqrt	(	const Quat< T > &	q,
		QuatAssumeType	assumeUnit
	)

friend

return $\sqrt{q}$ .

引数

q	a quaternion.
assumeUnit	if QUAT_ASSUME_UNIT, quaternion q assume to be a unit quaternion and this function will save some computations.

For example

Quatf q(1,2,3,4);
sqrt(q);
 
QuatAssumeType assumeUnit = QUAT_ASSUME_UNIT;
q = {1,0,0,0};
sqrt(q, assumeUnit); //This assumeUnit means q is a unit quaternion.

◆ tan

template<typename _Tp >

template<typename T >

Quat< T > tan ( const Quat< T > & q )

friend

return tan value of quaternion q, tan could be calculated as:

$\tan(q) = \frac{\sin(q)}{\cos(q)}.$

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

tan(q);

cv::Quat::tan

Quat< _Tp > tan() const

return tan value of this quaternion, tan could be calculated as:

◆ tanh

template<typename _Tp >

template<typename T >

Quat< T > tanh ( const Quat< T > & q )

friend

return tanh value of quaternion q, tanh could be calculated as:

$\tanh(q) = \frac{\sinh(q)}{\cosh(q)}.$

引数

q	a quaternion.

For example

Quatd q(1,2,3,4);

tanh(q);

cv::Quat::tanh

Quat< _Tp > tanh() const

return tanh value of this quaternion, tanh could be calculated as:

参照: sinh, cosh

このクラス詳解は次のファイルから抽出されました:

quaternion.hpp

公開メンバ関数

静的公開メンバ関数

公開変数類

静的公開変数類

フレンド

詳解

関数詳解

◆ acos()

◆ acosh()

◆ asin()

◆ asinh()

◆ assertNormal()

◆ at()

◆ atan()

◆ atanh()

◆ conjugate()

◆ cos()

◆ cosh()

◆ createFromAngleAxis()

◆ createFromEulerAngles()

◆ createFromRvec()

◆ createFromXRot()

◆ createFromYRot()

◆ createFromZRot()

◆ crossProduct()

◆ dot()

◆ exp()

◆ getAngle()

◆ getAxis()

◆ interPoint()

◆ inv()

◆ isNormal()

◆ lerp()

◆ log()

◆ nlerp()

◆ norm()

◆ normalize()

◆ operator*()

◆ operator*=() [1/2]

◆ operator*=() [2/2]

◆ operator+()

◆ operator+=()

◆ operator-() [1/2]

◆ operator-() [2/2]

◆ operator-=()

◆ operator/() [1/2]

◆ operator/() [2/2]

◆ operator/=() [1/2]

◆ operator/=() [2/2]

◆ power() [1/2]

◆ power() [2/2]

◆ sin()

◆ sinh()

◆ slerp()

◆ spline()

◆ sqrt()

◆ squad()

◆ tan()

◆ tanh()

◆ toEulerAngles()

◆ toRotMat3x3()

◆ toRotMat4x4()

◆ toRotVec()

◆ toVec()

フレンドと関連関数の詳解

◆ acos

◆ acosh

◆ asin

◆ asinh

◆ atan

◆ atanh

◆ cos

◆ cosh

◆ crossProduct

◆ cv::operator* [1/2]

◆ cv::operator* [2/2]

◆ cv::operator+ [1/2]

◆ cv::operator+ [2/2]

◆ cv::operator- [1/2]

◆ cv::operator- [2/2]