OpenCV453
列挙型
Flags used for image file reading and writing

列挙型

enum  cv::ImreadModes {
  cv::IMREAD_UNCHANGED = -1 , cv::IMREAD_GRAYSCALE = 0 , cv::IMREAD_COLOR = 1 , cv::IMREAD_ANYDEPTH = 2 ,
  cv::IMREAD_ANYCOLOR = 4 , cv::IMREAD_LOAD_GDAL = 8 , cv::IMREAD_REDUCED_GRAYSCALE_2 = 16 , cv::IMREAD_REDUCED_COLOR_2 = 17 ,
  cv::IMREAD_REDUCED_GRAYSCALE_4 = 32 , cv::IMREAD_REDUCED_COLOR_4 = 33 , cv::IMREAD_REDUCED_GRAYSCALE_8 = 64 , cv::IMREAD_REDUCED_COLOR_8 = 65 ,
  cv::IMREAD_IGNORE_ORIENTATION = 128
}
 Imread flags [詳解]
 
enum  cv::ImwriteFlags {
  cv::IMWRITE_JPEG_QUALITY = 1 , cv::IMWRITE_JPEG_PROGRESSIVE = 2 , cv::IMWRITE_JPEG_OPTIMIZE = 3 , cv::IMWRITE_JPEG_RST_INTERVAL = 4 ,
  cv::IMWRITE_JPEG_LUMA_QUALITY = 5 , cv::IMWRITE_JPEG_CHROMA_QUALITY = 6 , cv::IMWRITE_PNG_COMPRESSION = 16 , cv::IMWRITE_PNG_STRATEGY = 17 ,
  cv::IMWRITE_PNG_BILEVEL = 18 , cv::IMWRITE_PXM_BINARY = 32 , IMWRITE_EXR_TYPE = (3 << 4) + 0 , cv::IMWRITE_EXR_COMPRESSION = (3 << 4) + 1 ,
  cv::IMWRITE_WEBP_QUALITY = 64 , cv::IMWRITE_PAM_TUPLETYPE = 128 , cv::IMWRITE_TIFF_RESUNIT = 256 , cv::IMWRITE_TIFF_XDPI = 257 ,
  cv::IMWRITE_TIFF_YDPI = 258 , cv::IMWRITE_TIFF_COMPRESSION = 259 , cv::IMWRITE_JPEG2000_COMPRESSION_X1000 = 272
}
 Imwrite flags [詳解]
 
enum  cv::ImwriteEXRTypeFlags { cv::IMWRITE_EXR_TYPE_HALF = 1 , cv::IMWRITE_EXR_TYPE_FLOAT = 2 }
 
enum  cv::ImwriteEXRCompressionFlags {
  cv::IMWRITE_EXR_COMPRESSION_NO = 0 , cv::IMWRITE_EXR_COMPRESSION_RLE = 1 , cv::IMWRITE_EXR_COMPRESSION_ZIPS = 2 , cv::IMWRITE_EXR_COMPRESSION_ZIP = 3 ,
  cv::IMWRITE_EXR_COMPRESSION_PIZ = 4 , cv::IMWRITE_EXR_COMPRESSION_PXR24 = 5 , cv::IMWRITE_EXR_COMPRESSION_B44 = 6 , cv::IMWRITE_EXR_COMPRESSION_B44A = 7 ,
  cv::IMWRITE_EXR_COMPRESSION_DWAA = 8 , cv::IMWRITE_EXR_COMPRESSION_DWAB = 9
}
 
enum  cv::ImwritePNGFlags {
  cv::IMWRITE_PNG_STRATEGY_DEFAULT = 0 , cv::IMWRITE_PNG_STRATEGY_FILTERED = 1 , cv::IMWRITE_PNG_STRATEGY_HUFFMAN_ONLY = 2 , cv::IMWRITE_PNG_STRATEGY_RLE = 3 ,
  cv::IMWRITE_PNG_STRATEGY_FIXED = 4
}
 Imwrite PNG specific flags used to tune the compression algorithm. [詳解]
 
enum  cv::ImwritePAMFlags {
  IMWRITE_PAM_FORMAT_NULL = 0 , IMWRITE_PAM_FORMAT_BLACKANDWHITE = 1 , IMWRITE_PAM_FORMAT_GRAYSCALE = 2 , IMWRITE_PAM_FORMAT_GRAYSCALE_ALPHA = 3 ,
  IMWRITE_PAM_FORMAT_RGB = 4 , IMWRITE_PAM_FORMAT_RGB_ALPHA = 5
}
 Imwrite PAM specific tupletype flags used to define the 'TUPETYPE' field of a PAM file.
 

詳解

列挙型詳解

◆ ImreadModes

Imread flags

列挙値
IMREAD_UNCHANGED 

If set, return the loaded image as is (with alpha channel, otherwise it gets cropped). Ignore EXIF orientation.

IMREAD_GRAYSCALE 

If set, always convert image to the single channel grayscale image (codec internal conversion).

IMREAD_COLOR 

If set, always convert image to the 3 channel BGR color image.

IMREAD_ANYDEPTH 

If set, return 16-bit/32-bit image when the input has the corresponding depth, otherwise convert it to 8-bit.

IMREAD_ANYCOLOR 

If set, the image is read in any possible color format.

IMREAD_LOAD_GDAL 

If set, use the gdal driver for loading the image.

IMREAD_REDUCED_GRAYSCALE_2 

If set, always convert image to the single channel grayscale image and the image size reduced 1/2.

IMREAD_REDUCED_COLOR_2 

If set, always convert image to the 3 channel BGR color image and the image size reduced 1/2.

IMREAD_REDUCED_GRAYSCALE_4 

If set, always convert image to the single channel grayscale image and the image size reduced 1/4.

IMREAD_REDUCED_COLOR_4 

If set, always convert image to the 3 channel BGR color image and the image size reduced 1/4.

IMREAD_REDUCED_GRAYSCALE_8 

If set, always convert image to the single channel grayscale image and the image size reduced 1/8.

IMREAD_REDUCED_COLOR_8 

If set, always convert image to the 3 channel BGR color image and the image size reduced 1/8.

IMREAD_IGNORE_ORIENTATION 

If set, do not rotate the image according to EXIF's orientation flag.

◆ ImwriteEXRCompressionFlags

列挙値
IMWRITE_EXR_COMPRESSION_NO 

no compression

IMWRITE_EXR_COMPRESSION_RLE 

run length encoding

IMWRITE_EXR_COMPRESSION_ZIPS 

zlib compression, one scan line at a time

IMWRITE_EXR_COMPRESSION_ZIP 

zlib compression, in blocks of 16 scan lines

IMWRITE_EXR_COMPRESSION_PIZ 

piz-based wavelet compression

IMWRITE_EXR_COMPRESSION_PXR24 

lossy 24-bit float compression

IMWRITE_EXR_COMPRESSION_B44 

lossy 4-by-4 pixel block compression, fixed compression rate

IMWRITE_EXR_COMPRESSION_B44A 

lossy 4-by-4 pixel block compression, flat fields are compressed more

IMWRITE_EXR_COMPRESSION_DWAA 

lossy DCT based compression, in blocks of 32 scanlines. More efficient for partial buffer access. Supported since OpenEXR 2.2.0.

IMWRITE_EXR_COMPRESSION_DWAB 

lossy DCT based compression, in blocks of 256 scanlines. More efficient space wise and faster to decode full frames than DWAA_COMPRESSION. Supported since OpenEXR 2.2.0.

◆ ImwriteEXRTypeFlags

列挙値
IMWRITE_EXR_TYPE_HALF 

store as HALF (FP16)

IMWRITE_EXR_TYPE_FLOAT 

store as FP32 (default)

◆ ImwriteFlags

Imwrite flags

列挙値
IMWRITE_JPEG_QUALITY 

For JPEG, it can be a quality from 0 to 100 (the higher is the better). Default value is 95.

IMWRITE_JPEG_PROGRESSIVE 

Enable JPEG features, 0 or 1, default is False.

IMWRITE_JPEG_OPTIMIZE 

Enable JPEG features, 0 or 1, default is False.

IMWRITE_JPEG_RST_INTERVAL 

JPEG restart interval, 0 - 65535, default is 0 - no restart.

IMWRITE_JPEG_LUMA_QUALITY 

Separate luma quality level, 0 - 100, default is 0 - don't use.

IMWRITE_JPEG_CHROMA_QUALITY 

Separate chroma quality level, 0 - 100, default is 0 - don't use.

IMWRITE_PNG_COMPRESSION 

For PNG, it can be the compression level from 0 to 9. A higher value means a smaller size and longer compression time. If specified, strategy is changed to IMWRITE_PNG_STRATEGY_DEFAULT (Z_DEFAULT_STRATEGY). Default value is 1 (best speed setting).

IMWRITE_PNG_STRATEGY 

One of cv::ImwritePNGFlags, default is IMWRITE_PNG_STRATEGY_RLE.

IMWRITE_PNG_BILEVEL 

Binary level PNG, 0 or 1, default is 0.

IMWRITE_PXM_BINARY 

For PPM, PGM, or PBM, it can be a binary format flag, 0 or 1. Default value is 1.

IMWRITE_EXR_COMPRESSION 

override EXR storage type (FLOAT (FP32) is default)

IMWRITE_WEBP_QUALITY 

override EXR compression type (ZIP_COMPRESSION = 3 is default)

For WEBP, it can be a quality from 1 to 100 (the higher is the better). By default (without any parameter) and for quality above 100 the lossless compression is used.

IMWRITE_PAM_TUPLETYPE 

For PAM, sets the TUPLETYPE field to the corresponding string value that is defined for the format

IMWRITE_TIFF_RESUNIT 

For TIFF, use to specify which DPI resolution unit to set; see libtiff documentation for valid values

IMWRITE_TIFF_XDPI 

For TIFF, use to specify the X direction DPI

IMWRITE_TIFF_YDPI 

For TIFF, use to specify the Y direction DPI

IMWRITE_TIFF_COMPRESSION 

For TIFF, use to specify the image compression scheme. See libtiff for integer constants corresponding to compression formats. Note, for images whose depth is CV_32F, only libtiff's SGILOG compression scheme is used. For other supported depths, the compression scheme can be specified by this flag; LZW compression is the default.

IMWRITE_JPEG2000_COMPRESSION_X1000 

For JPEG2000, use to specify the target compression rate (multiplied by 1000). The value can be from 0 to 1000. Default is 1000.

◆ ImwritePNGFlags

Imwrite PNG specific flags used to tune the compression algorithm.

These flags will be modify the way of PNG image compression and will be passed to the underlying zlib processing stage.

  • The effect of IMWRITE_PNG_STRATEGY_FILTERED is to force more Huffman coding and less string matching; it is somewhat intermediate between IMWRITE_PNG_STRATEGY_DEFAULT and IMWRITE_PNG_STRATEGY_HUFFMAN_ONLY.
  • IMWRITE_PNG_STRATEGY_RLE is designed to be almost as fast as IMWRITE_PNG_STRATEGY_HUFFMAN_ONLY, but give better compression for PNG image data.
  • The strategy parameter only affects the compression ratio but not the correctness of the compressed output even if it is not set appropriately.
  • IMWRITE_PNG_STRATEGY_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler decoder for special applications.
列挙値
IMWRITE_PNG_STRATEGY_DEFAULT 

Use this value for normal data.

IMWRITE_PNG_STRATEGY_FILTERED 

Use this value for data produced by a filter (or predictor).Filtered data consists mostly of small values with a somewhat random distribution. In this case, the compression algorithm is tuned to compress them better.

IMWRITE_PNG_STRATEGY_HUFFMAN_ONLY 

Use this value to force Huffman encoding only (no string match).

IMWRITE_PNG_STRATEGY_RLE 

Use this value to limit match distances to one (run-length encoding).

IMWRITE_PNG_STRATEGY_FIXED 

Using this value prevents the use of dynamic Huffman codes, allowing for a simpler decoder for special applications.